Full Tutorial How to Flash the Latest Xiaomi Pocophone F1

0
32
Complete Tutorial How to Flash the Latest Xiaomi Pocophone F1 – Here are the steps you can follow to flash the Xiaomi Pocophone F1 firmware. There are two flashing methods that can be used to update the firmware, the first is flashing the fastboot firmware using a computer or laptop, the second is flashing the OTA firmware through the updater or recovery mode without the need to use a computer or laptop.

Flashing firmware can be used to update ROM. The goals vary from repairing hard bricks, soft bricks, bootloop / Android cannot enter the system, erasing the entire system contents so that the phone looks like new again, or it can also be to downgrade and upgrade the Android version.
If the Xiaomi smartphone that will be flashed is in hard brick, soft brick or bootloop condition and cannot enter the system or there are other things the user wants (eg want to clean install / delete all contents smartphone to return to like new or downgrade and upgrade the Android system) then you must use the fastboot firmware flashing method. While flashing OTA firmware can be used to upgrade the ROM that is being used without losing data and existing applications. However, flashing OTA firmware can also be used to downgrade the Android system, it’s just that all of your data in the internal memory will be lost.
Full Tutorial How to Flash the Latest Xiaomi Pocophone F1

Review and specifications of the latest Xiaomi Pocophone F1

Xiaomi Pocophone F1 is a mobile phone that was released in August 2018. At the beginning of its launch, this smartphone, which is often referred to as the flagship killer, has successfully attracted the attention of gadget lovers because of its fierce specifications with a very high price tag. affordable compared to other competitors.
Poco F1 features a 6.18-inch 1080p IPS screen with Gorilla Glass protection on the outside. In the kitchen sector, this mobile phone, which is now priced below four million rupiah, is equipped with a 64-bit octa-core Snapdragon 845 processor with a clock speed of up to 2.8GHz, which is still very powerful. It is undeniable that the Snapdragon 600 series and 700 series continue to receive updates with new technologies that did not exist in the Pocophone F1 era but nevertheless Snapdragon 845 is still superior in terms of performance, even at the end of 2020 though.
On the camera side, this smartphone with the codename Beryllium is equipped with a 12MP camera with f/1.9 aperture with Sony IMX363 Exmor RS sensor. There are two lenses. Although not as much as in the latest cellphones today, the quality of the photos produced is quite good with a photo score on DxOMark reaching 92 points and a video score of 90 points. In the power sector, there is a 4000 mAh battery which is enough for you to use all day long. To play games like PUBG Mobile, Pocophone F1 can last up to 4 hours.
There are several storage variants that you can choose from, for the lowest version there is a 6GB RAM variant with 64GB internal memory. On top of that there is a 6GB RAM version with 128GB storage, while the highest option is 8GB RAM with up to 256GB storage + Armored Edition.

  Spotify does not open on Android: solution

Xiaomi Pocophone F1 Firmware Flashing Prerequisite

Pay attention to the following points before flashing :
  • Specially flashing the firmware using the fastboot method, make sure the Xiaomi smartphone to be flashed is already in an unlocked bootloader condition The tutorial on how to check the bootloader status will be explained below later. Another alternative if the bootloader is still locked, you can activate Emergency Download / EDL mode (you can search for EDL mode tutorials on the internet)
  • Make sure your Xiaomi Pocophone F1 battery is full, or at least above 80% just in case during flashing an interruption occurs, whether intentional or not, which causes your smartphone to not be charged, unable to connect to a computer or laptop, does not respond to the power button, suddenly shuts down, etc.
  • If your Xiaomi Pocophone F1 is not in a hard brick, soft brick or bootloop condition, do a backup by moving important data from the internal memory because after flashing the fastboot firmware, all your data will be deleted. External memory should not need to be backed up. But if you are in doubt, to be safer before flashing, you can remove it first
  • If your Xiaomi Pocophone F1 is not in a hard brick, soft brick or bootloop condition, enable USB Debugging. The trick, go to Settings < About then tap MIUI Version ten times until developer mode is active, then return to the initial Settings menu then look for Developer Options in the Additional Settings menu. There you can slide the screen down until you find the USB Debugging option then tick to enable it
  • Make sure you are using the latest 64-bit version of Windows. The reason is because the latest version of the Mi Flash Tool that we will use only supports 64 bits, whereas if it is forced to run on 32 bit versions of Windows there is a possibility that problems will occur when flashing fastboot firmware later.

Tutorial How to Check Bootloader Status of Latest Xiaomi Pocophone F1

There are two ways to check the bootloader status of Xiaomi Pocophone F1. The first is by looking at the bootloader status from the Mi Unlock status menu in the Developer options. However, if your smartphone cannot enter the system, follow the second method below:
  • Download ADB Kit 64 bit here then extract it on your computer or laptop
  • Open the 64-bit ADB Kit folder that you extracted earlier
  • From within the ADB Kit 64 bit folder, open CMD by pressing shift + right click then select “Open command window here”
Full Tutorial How to Flash the Latest Xiaomi Pocophone F1
  • Turn off the Xiaomi smartphone to check the bootloader status
  • Press and hold the volume down button + power button together for a few seconds until it says Fastboot with the Android logo on it
  • Connect your smartphone to your computer or laptop using the original USB data cable
  How to Update an Amazon Echo or Echo Show to the Latest Version
Full Tutorial How to Flash the Latest Xiaomi Pocophone F1
  • Type the command fastboot devices then enter to check if your phone is connected to the computer as fastboot or not
  • If so, type the command fastboot oem device-info then enter to check the bootloader status
Full Tutorial How to Flash the Latest Xiaomi Pocophone F1
Pay attention to the bootloader status above. If the Device unlocked and Device critical unlocked (or Device unlocked only) line is true, then the bootloader of your Xiaomi Pocophone F1 smartphone is unlocked. If the status is false it means otherwise.

Tutorial How to Easily Flash Xiaomi Pocophone F1 Firmware Using Fastboot Method

Steps to flash the Xiaomi Pocophone F1 firmware using the fastboot method as follows :
  • Download the latest version of Mi Flash Tool here then extract it on your computer or laptop
  • Download the latest Xiaomi Pocophone F1 fastboot firmware here then extract it. Make sure you download the fastboot firmware according to the type of Xiaomi smartphone you want to flash again Error downloading the firmware can result in a hard bricked phone which makes it unusable and must be sent to a service center for repair
Full Tutorial How to Flash the Latest Xiaomi Pocophone F1
  • Turn off the Xiaomi smartphone to be flashed
  • Press and hold the volume down button + power button together for a few seconds until it says Fastboot with the Android logo on it
  • Connect your smartphone to your computer or laptop using the original USB data cable
  • Open the Mi Flash Tool folder that you extracted earlier then run XiaoMiFlash.exe
Full Tutorial How to Flash the Latest Xiaomi Pocophone F1
  • Press the Select button on the top left of the Mi Flash Tool, then select the location of the Xiaomi Pocophone F1 firmware that you extracted earlier
Full Tutorial How to Flash the Latest Xiaomi Pocophone F1
  • Press the Refresh button on the top right of the Mi Flash Tool if your smartphone is not detected in the device list
  • Select the “clean all” menu at the bottom right of the Mi Flash Tool to clean install or flash the Xiaomi Pocophone F1 firmware thoroughly
Full Tutorial How to Flash the Latest Xiaomi Pocophone F1
  • If you have done all the steps above without any problems, press the Flash button on the top right of the Mi Flash Tool to start installing the Xiaomi firmware
  • Wait a while until the flashing process is complete. Usually for the previous type of Xiaomi device it will not take a long time, depending on the size of the firmware, it can be 5 minutes or maybe 10 minutes
Full Tutorial How to Flash the Latest Xiaomi Pocophone F1
  • After the firmware flashing process is complete, a success statement will appear in the result column. At this stage you can close Mi Flash Tool then unplug your phone from your computer or laptop and turn it back on

Tutorial How to Easily Flash Firmware Xiaomi Pocophone F1 Using System Update Method Via Updater

Steps to flash the Xiaomi Pocophone F1 firmware using the system update method via updater as follows:
  • Open the latest Xiaomi OTA firmware download page here then select Xiaomi Pocophone F1
  • Look at the options menu on the left of the screen. Make sure the region you choose is correct. Generally you can use Global regional or if you have a regional ID it’s also fine
  • Press the “Download Full ROM” button to download the ROM. Don’t forget to change the name to update.zip
  Most Wanted Android List, Android 12 Most Failed
Full Tutorial How to Flash the Latest Xiaomi Pocophone F1
  • Move the OTA firmware file to the outermost internal memory (don’t put it in any folder)
  • Open the Settings app, select About Phone and then open System Update
Full Tutorial How to Flash the Latest Xiaomi Pocophone F1
  • Press the three dots at the top right of the screen, then select “Choose update package”. Keep in mind that if the menu doesn’t exist, you can press the MIUI version image (circled in red in the image above) about ten times until the choose update package menu comes out
  • Select the OTA firmware file that you put in the outermost internal memory then press OK
  • Especially for those of you who want to downgrade the Android system, at this stage a dialog will appear that contains something like this, “You’re going to revert to MIUI version . Your personal data will be erased . Make sure to back up anything you want to keep before you start the process”. Press Erase and update to continue
  • Shortly after that your Xiaomi Pocophone F1 phone will start the ROM upgrade process. Follow all instructions that appear
  • If there are no problems during the OTA flashing process, your smartphone will boot automatically after the upgrade process is complete

Tutorial How to Easily Flash Xiaomi Pocophone F1 Firmware Using System Update Method Via Recovery Mode

Steps to flash the Xiaomi Pocophone F1 firmware using the system update method via recovery mode as follows:
  • Download the latest Xiaomi Pocophone F1 OTA firmware according to the instructions above. Don’t forget to change the name to update.zip and put the OTA firmware file in the outermost internal memory (don’t put it in any folder)
  • Press and hold volume up button + power button together to enter recovery mode
  • When the language selection appears, select English by pressing the volume button for navigation and the power button for OK
  • Select the “Install update.zip” menu to install the Xiaomi Pocophone F1 OTA firmware
  • Select Yes when the update.zip installation confirmation dialog appears
  • Wait a while until the OTA firmware installation process is complete. Make sure no errors appear
  • After the installation process is successful (marked with the message “Update complete!” or something like that) select the Back menu then Reboot
That’s the tutorial on how to re-flash the latest Xiaomi Pocophone F1 using Mi Flash Tool and System Update that you can try. The tutorial above is very easy to follow by anyone, both ordinary and experienced Android users. As long as you understand the step by step thoroughly from start to finish, it is guaranteed that you can practice it in just a short time without encountering any obstacles.
Fill in the comments below if something is unclear or you want to ask something. Don’t hesitate to request a similar Android tutorial if you need it. Finally, share this article from the menu that has been provided if you think it is useful for others. Thank you.